| Customization: | Available |
|---|---|
| After-sales Service: | 3 Years |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Vertical CNC Lathe
1. The machine tool adopts a modular design as a whole, with an overall widened base, and the widened guide rails of the columns and beams adopt THK/Taiwan Hiwin RGH heavy-duty linear guides. The large span makes it thicker and more stable during operation.
2. The spindle unit adopts advanced design technology. In order to increase the cutting torque, the spindle diameter is thickened on the basis of the conventional structure, a set of bidirectional angular bearings is added, and oil bath air-cooled internal circulation is used for lubrication. method, thus effectively improving the lubrication capacity, reducing the friction coefficient, ensuring the stability of temperature rise, extending the life of the bearing, and being more suitable for high-speed, long-term, and high-load operation. It avoids the high cost of similar machine tool spindle grease lubrication without refilling, maintenance-free, short bearing life, and can only be replaced and repaired.
3. The ball screw adopts THK/PMI brand, and the Z and It reduces the quantitative changes caused by temperature rise to the screw and nut, improves the service life of the bearing, screw and nut, and ensures the positioning accuracy of the screw.
4. In order to adapt to the cutting needs of different customers for workpieces, we have designed two spindle drives. One is driven by a gearbox to increase the torque. The gear ratio is 1:5. The other is directly driven by a high-power servo motor. Ratio: 1:2.5.
5. The whole machine adopts a fully automatic hydraulic control system, automatic hydraulic power card, double cylinder design, and is equipped with a special combination clamp independently developed by our company. It lifts the workpiece and clamps it in the air, and controls the pressure required for roughing and finishing through automatic segmentation. This enables one-time clamping to complete rough and finish machining, ensuring the machining accuracy of all surfaces of the workpiece and greatly improving the output rate of the workpiece. This avoids the time consumed by secondary clamping and calibration and the deformation of the workpiece caused by traditional clamping.
6. The Z-axis adopts a balanced cylinder design, which is supplied through the hydraulic system to adjust the relative value of nitrogen, reducing the Z-axis servo motor load and screw nut load, and improving the service life of the servo motor and screw nut.
7. The 12-station hydraulic servo horizontal turret is used to meet the needs of various workpieces for tools and the tool change speed is faster. The addition of a long and thick tool bar avoids tool vibration and chatter marks caused by rigidity, and improves the processing time and quality of the workpiece.
8. The control system is equipped with FANUC 0ITF as standard, and Syntec, GSK, HNC, and Siemens can be optional.
9. The whole machine adopts fully enclosed protection inside and outside. The cooling system adopts high-lift double water pump circulation cooling, and is equipped with automatic chip flushing, which is discharged through a chain plate chip conveyor, which increases the operator's working time and reduces labor intensity.
10. Design a variety of special fixtures for one-time clamping and molding according to different workpiece characteristics.
| Specification | Unit | CKG514 | CKG515 | CKG516 | CKG518 | CKG5110 |
| Max. swing diameter | mm | 700 | 800 | 900 | 1000 | 1250 |
| Max. turning diameter | mm | 500 | 600 | 700 | 800 | 1150 |
| Max. turning height | mm | 500 | 700 | 800 | 900 | 900 |
| Spindle nose | / | A2-8 | A2-11 | A2-11 | A2-11 | A2-15 |
| Spindle speed | r/min | 2500 | 2000 | 500/2000 | 5001 | 350 |
| Spindle motor power | kW | 18.5 | 22 | 20+Gearbox/22 | 20+Gearbox | 37+Gearbox |
| Chuck size | Inch | 15″ | 21″ | 24″ | 32″ | 32″/1000 4 claws |
| X axis motor torque | Nm | 18 | 20 | 22 | 22 | 30 |
| Z axis motor torque | Nm | 18 | 20 | 22 | 22 | 30 |
| X axis travel | mm | -30-330 | -30-380 | -50-420 | -50-460 | -50-460 |
| Z axis travel | mm | 550 | 750 | 850 | 920 | 920 |
| X axis fast moving speed | m/min | 16 | 16 | 15 | 15 | 12 |
| Z axis fast moving speed | m/min | 16 | 16 | 15 | 15 | 12 |
| X/Z axis positioning accuracy | mm | 0.005 | 0.005 | 0.007 | 0.007 | 0.01 |
| X/Z axis repeated positioning accuracy | mm | 0.003 | 0.003 | 0.005 | 0.005 | 0.007 |
| Turret type | / | Horizontal 8 stations | Horizontal/Vertical | Horizontal/Vertical | Horizontal/Vertical | Vertical |
| Tool size | mm | 25/Φ50 | 25/Φ50 | 32/Φ50 | 32/Φ50 | 32/Φ50 |
| Machining accuracy and roughness | / | IT6-IT7/Ra1.6 | IT6-IT7/Ra1.6 | IT6-IT7/Ra1.6 | IT6-IT7/Ra1.6 | IT6-IT7/Ra1.6 |
| Max. load of the workpiece | KG | 300 | 500 | 1000 | 1000 | 1500 |
| L×W×H | mm | 2150×1500×2800 | 2550×3065×3250 | 2800×3400×3450 | 3060×3400×3450 | 3120×3510×3450 |
| Machine weight | KG | 6500 | 9000 | 10000 | 13000 | 15000 |
| Total Power | KVA | 30 | 35 | 45 | 50 | 55 |
SHINRI CNC Machinery Group is consisted of Jiangsu Shinri Heavy lndustry Science &Technology Co., Ltd, Jiangsu Shinri Gear Systems Co., Ltd Ningxia Shinri Changcheng Machinery Co., Ltd, Ningxia Shinri Changcheng Casting Company Co., Ltd. Lt is subordinate to the New United Group. Shinri products covered three time-honored brands, respectively Shinri, Changcheng and Duoleng and 12 different products series. So far Shinri becomes one of the biggest machine tool manufacturers covering nearly alltypes of machines in China.
By embracing new, high and outstanding technology, Shinri opens his hands to escalate his customers from their traditional applications and gives optimized solutions. The two R&D centers and manufactory bases, in Changzhou and Yinchuan, have totalarea of premises of 700 thousands m and 300 thousands m modernized plants. We introduced a good number of high precision mother machines from world first class makers and the yearly machine production reaches to 3500 pieces or more. In Yinchuan city, by invested 600 mllion RMB, the first phase of construction of foundry plant has established with yearly capacity 40 thousand tons With strong financial, intelligent and technical supports, the company is gigantic in R&D and manufactory.
Its products list covers VMC, HMC, CNC lathe, gantry boring milling/machining center/5 faces/5-axis synchronous, floor type boring milling/machining center, end facing & centering machine, drilling machine, FMC, FMS, Railway gear box, Wind power gear box and industrial gear box etc. The products are broadly applicable to aerospace, automobile, shipbuilding, electronic appliance, new energies sources, railway traffic, engineering mechanic, petro chemistry, die tooling and vocational education...etc.
As a national enterprise endowed with the mission of rejuvenating Chinese traditional industry, Shinri will follow the concept ofputing people first, making innovations & building a future of excellence. Work under the guiding principle of providing the highquality products & best service for customers in order to become the most competifive CNC machine tool manufacturer & bestsolution provider at home & abroad.
){kind=link}